Tomzn 250A 4P MCCB Circuit Breaker TOM7-250 4 Pole AC
The Tomzn 250A 4P MCCB is an AC molded case circuit breaker designed for compatible three-phase, four-wire electrical distribution systems. Part of the TOMZN TOM7 AC series, this circuit breaker features a 250A rated current and a four-pole configuration for applications that require coordinated switching and protection of three phase conductors and a neutral conductor.
The TOM7-250 4P MCCB is designed for commercial, industrial, and electrical distribution applications where a suitable high-current circuit protection device is required. Its molded case construction houses the internal switching and protection mechanism, while its four-pole arrangement supports compatible electrical systems that require four-pole switching.
The TOMZN TOM7 AC product specifications list an AC 400V rating for the series, with different current ratings and breaking capacities. The 250A four-pole variant is identified as TOM7-250/4300.
Whether you are upgrading a distribution board, planning an industrial electrical panel, or sourcing protection equipment for a commercial installation, selecting the correct MCCB is essential. Always verify the complete product specifications and installation requirements before purchase.
What Is Tomzn 250A 4P MCCB?
MCCB stands for Molded Case Circuit Breaker. It is an electrical protection device designed to interrupt current when specified overload or short-circuit conditions occur.
The Tomzn 250A 4P MCCB combines a 250A rated current with a four-pole configuration. The 250A value identifies its rated current, while 4P means the breaker has four poles.
A four-pole MCCB is commonly used in compatible three-phase, four-wire electrical distribution systems. It can provide coordinated switching of three phase conductors and a neutral conductor, depending on the product design and electrical installation requirements.
Unlike a simple manual isolator, an MCCB incorporates a protective tripping mechanism. When the current reaches the device’s specified operating characteristics, the breaker is designed to interrupt the circuit.
Main Features of Tomzn 250A 4P MCCB TOM7-250
1. 250A Rated Current
The Tomzn 250A 4P MCCB is designed for applications requiring a circuit breaker with a 250A rated current.
This rating makes it a potential choice for compatible electrical distribution systems with higher current requirements. The breaker must be selected according to the connected load, cable capacity, ambient conditions, and applicable electrical standards.
A 250A rating does not automatically mean the breaker is suitable for every circuit carrying up to 250A. Proper electrical calculations are necessary.
2. Four-Pole Configuration
The 4P arrangement is one of the key features of this circuit breaker.
Four-pole MCCBs are commonly used in compatible three-phase, four-wire electrical systems. They allow the switching arrangement to include three phase conductors and a neutral conductor.
The exact neutral-pole design and protection behavior should be confirmed from the manufacturer’s documentation. The correct pole configuration depends on the system’s neutral and earthing requirements.
3. TOM7-250 Series
The TOM7-250 is part of the TOMZN TOM7 AC molded case circuit breaker family.
The series includes different current ratings and pole configurations. The four-pole 250A version is identified by the model code TOM7-250/4300.
When ordering, check the model code on the product label to ensure you receive the intended 250A four-pole AC version.
4. AC 400V Application
The TOM7 AC series is specified for three-phase, four-wire AC 400V electrical systems.
This makes it a potential option for compatible commercial and industrial AC distribution applications. Always confirm the rated operating voltage and frequency on the exact product before installation.
5. Overload Protection
Overloads occur when a circuit carries more current than its intended operating level for a period of time.
An appropriately selected MCCB is designed to interrupt excessive current according to its trip characteristics. This helps reduce the risk of overheating and damage to electrical cables and connected equipment.
6. Short-Circuit Protection
Short circuits can produce very high fault currents. A circuit breaker must have a suitable breaking capacity to interrupt the prospective fault current at its installation point.
The TOM7-250 AC four-pole variant is listed with an ultimate breaking capacity of 50kA and a service breaking capacity of 35kA. These values must be checked against the actual product label and manufacturer’s documentation.
7. Molded Case Construction
The molded case provides an enclosed housing for the breaker’s internal components and operating mechanism.
This construction is commonly used in electrical distribution boards, switchboards, and industrial electrical panels. Correct mounting, terminal connections, clearances, and installation conditions must follow the manufacturer’s instructions.
Applications of a 250A Four-Pole MCCB
The Tomzn 250A 4P MCCB may be considered for compatible electrical distribution installations where its ratings and protection characteristics match the system design.
Potential application areas include:
- Industrial electrical panels: For suitable three-phase power distribution systems.
- Commercial buildings: For compatible electrical distribution arrangements in offices, shops, and commercial facilities.
- Main distribution boards: Where a 250A four-pole MCCB is specified by the electrical design.
- Factories and workshops: For compatible three-phase electrical distribution circuits.
- Electrical switchboards: For installations designed around the breaker’s dimensions and electrical ratings.
- Three-phase, four-wire systems: Where four-pole switching is required by the installation design.
- Building power distribution: For suitable circuits in commercial and industrial properties.
These are general MCCB application examples. The exact installation must be checked by a qualified electrical professional.
Why Is a Four-Pole MCCB Important?
Some three-phase electrical systems use three phase conductors and a neutral conductor. Depending on the electrical design, the installation may require a protective device that switches all four conductors.
A four-pole MCCB can support this type of switching arrangement when its design and ratings match the system requirements.
The fourth pole is particularly relevant where neutral switching is required. However, the neutral conductor’s protection and switching arrangement must be considered carefully.
A 4P MCCB should not be selected simply because it has an additional pole. The electrical designer must confirm the system configuration, earthing arrangement, neutral requirements, and manufacturer’s instructions.
Understanding the 250A Current Rating
The 250A rating is an important factor when selecting this circuit breaker, but it should not be the only consideration.
Correct selection depends on several factors:
- Expected operating and maximum load current.
- Cable size and current-carrying capacity.
- Ambient temperature and panel conditions.
- Type of connected electrical equipment.
- Prospective short-circuit current.
- Protection coordination with other devices.
- Applicable electrical installation standards.
An incorrectly selected breaker may fail to provide the intended level of circuit protection. For example, the breaker rating must be coordinated with the current-carrying capacity of the connected cables.
A qualified electrician or electrical engineer should verify the complete electrical design before installation.
Technical Specifications of Tomzn 250A 4P MCCB
The TOMZN TOM7 AC product family lists the following specifications for its 250A four-pole variant:
- Brand: TOMZN.
- Series: TOM7 AC.
- Model code: TOM7-250/4300.
- Product type: Molded Case Circuit Breaker (MCCB).
- Rated current (In): 250A.
- Number of poles: 4P.
- Rated operating voltage: AC 400V.
- Application: Three-phase, four-wire AC system.
- Rated frequency: 50/60Hz.
- Ultimate breaking capacity (Icu): 50kA.
- Service breaking capacity (Ics): 35kA.
- Rated impulse withstand voltage (Uimp): 12kV.
- Reference ambient temperature: 40°C, Category A.
- Listed dimensions (width × height): 141 × 165mm.
Always verify the exact model code and markings on the product supplied. Installation dimensions, terminal arrangements, and other details should be checked against the manufacturer’s documentation.
What Is Breaking Capacity in an MCCB?
Breaking capacity refers to the fault-current level that a circuit breaker can interrupt under specified test conditions.
Two important specifications are:
Icu – Ultimate Breaking Capacity: The rated maximum short-circuit current the breaker can interrupt under defined test conditions.
Ics – Service Breaking Capacity: The rated service short-circuit breaking capacity associated with the device’s performance after the prescribed test sequence.
For the listed TOM7-250/4300 model, the published values are 50kA Icu and 35kA Ics.
These values are important when selecting a breaker for an electrical distribution system. The breaking capacity must be appropriate for the prospective fault current at the installation point.
MCCB vs MCB: What Is the Difference?
MCB stands for Miniature Circuit Breaker, while MCCB stands for Molded Case Circuit Breaker.
Both devices are designed for electrical circuit protection, but they are commonly used in different current ranges and applications.
MCBs are widely used in final distribution circuits and lower-current applications. MCCBs are commonly considered for higher-current commercial and industrial distribution systems.
The correct choice depends on current rating, voltage, breaking capacity, trip characteristics, and installation requirements. A higher current rating alone does not make a breaker suitable for every application.
Buying Guide: How to Choose the Right 250A MCCB
Before purchasing the Tomzn 250A 4P MCCB, consider these important points:
- Confirm the current requirement: Make sure 250A is appropriate for the intended load and cable protection design.
- Check the pole configuration: Confirm that a four-pole breaker is required for the electrical system.
- Verify the operating voltage: Ensure the AC 400V rating is compatible with the installation.
- Review breaking capacity: Confirm that the 50kA Icu and 35kA Ics ratings are suitable for the available fault current.
- Check the frequency: Verify compatibility with the electrical system’s operating frequency.
- Review the neutral arrangement: Confirm that the neutral pole is suitable for the system design.
- Check panel dimensions: Ensure the breaker fits the intended distribution board.
- Verify the model code: Confirm TOM7-250/4300 on the product label.
- Consult a professional: Have a qualified electrician or electrical engineer approve the selection and installation.
Why Choose TOMZN Electrical Protection Products?
TOMZN offers a range of electrical protection and distribution products, including MCBs, MCCBs, RCBOs, RCCBs, and other electrical accessories.
The TOM7 AC series provides molded case circuit breaker options with different current ratings and pole configurations. This allows buyers to consider different models for suitable electrical distribution requirements.
However, products within the same series can have different ratings and configurations. Always check the exact product code and technical documentation before purchasing.
Buy Tomzn 250A 4P MCCB from Asbaab.pk
Looking for the Tomzn 250A 4P MCCB for your electrical distribution project? Explore electrical protection products at Asbaab.pk and choose equipment according to your installation requirements.
The TOM7-250 four-pole AC circuit breaker is intended for compatible three-phase, four-wire applications requiring a 250A rated current. Its listed breaking capacity and operating voltage make it important to verify the exact product variant before ordering.
Whether you are sourcing electrical products for an industrial panel, commercial building, workshop, or distribution board, selecting the correct protection device is essential.
Asbaab.pk aims to make it easier to explore electrical products for residential, commercial, and industrial requirements.
Frequently Asked Questions
1. What is Tomzn 250A 4P MCCB?
It is a TOMZN TOM7 AC molded case circuit breaker with a 250A rated current and four-pole configuration for compatible electrical distribution systems.
2. What does 4P mean in an MCCB?
4P means four-pole. It is commonly used in compatible three-phase, four-wire electrical systems where switching of three phase conductors and a neutral conductor is required.
3. What is the model number of this circuit breaker?
The listed model code for the 250A four-pole TOM7 AC version is TOM7-250/4300.
4. What is the rated voltage of Tomzn TOM7-250 4P MCCB?
The TOM7 AC series is listed for three-phase, four-wire AC 400V applications. Confirm the exact product label before connecting it to an electrical system.
5. What is the breaking capacity of this 250A MCCB?
The listed TOM7-250/4300 variant has an ultimate breaking capacity (Icu) of 50kA and a service breaking capacity (Ics) of 35kA.
6. Can this MCCB be used as a main breaker?
It may be suitable for a main distribution application if its current rating, voltage, breaking capacity, pole arrangement, and protection characteristics match the electrical design. Professional verification is necessary.
7. What is the difference between 3P and 4P MCCB?
A 3P MCCB has three poles, while a 4P MCCB has four. The fourth pole is commonly used for neutral switching in compatible three-phase, four-wire systems.
8. Does this MCCB provide overload and short-circuit protection?
MCCBs are generally designed to interrupt overload and short-circuit currents within their specified operating limits. Follow the manufacturer’s documentation for the exact protection characteristics.
9. What is the frequency supported by the TOM7 AC series?
The TOM7 AC family is listed for 50/60Hz operation. Check the exact product markings and documentation before installation.
10. What should I check before buying this MCCB?
Confirm the model code, 250A rated current, four-pole configuration, AC 400V rating, Icu, Ics, dimensions, and compatibility with your electrical system.
Safety and Installation Notice
MCCBs are important electrical protection devices and should be selected and installed by qualified professionals. Always isolate the power supply before electrical work and follow the manufacturer’s wiring, mounting, and operating instructions.
Do not choose a breaker based only on its current rating or pole count. Confirm the complete electrical specifications and ensure the device is suitable for the connected cables, electrical equipment, and available fault current.
The Tomzn 250A 4P MCCB TOM7-250 should only be installed in a compatible electrical system and operated within the manufacturer’s specified limits.



Reviews
There are no reviews yet.