Dahua PFM920I-6U-C 305m UTP CAT6 Network Cable

The Dahua PFM920I-6U-C is a 305-meter UTP CAT6 network cable designed for reliable Ethernet networking and CCTV installations. It is suitable for connecting IP cameras, network switches, NVRs, routers, computers and other compatible network equipment. The cable is designed to provide a practical structured cabling solution for residential, commercial and professional networking environments.

With its high-purity oxygen-free copper conductor, CAT6 construction and support for Power over Ethernet applications, the Dahua PFM920I-6U-C is particularly suitable for IP surveillance installations where network connectivity and power may need to be carried through the same Ethernet cable.

305m Cable Length

The cable is supplied in a 305-meter carton, providing sufficient cable length for larger network and CCTV installations. The long cable length allows installers to create multiple network connections from a single cable box while reducing the need for frequent cable replacement during an installation project.

The actual usable cable length can vary depending on installation practices and cutting requirements.

High-Purity Oxygen-Free Copper Conductor

The Dahua PFM920I-6U-C uses a 99.97% oxygen-free copper conductor with a conductor diameter of approximately 0.57mm ± 0.01mm. The cable uses a 23AWG conductor specification.

The use of high-purity copper provides a suitable conductive path for Ethernet networking and PoE applications. This makes the cable appropriate for professional network infrastructure where consistent cable construction is important.

CAT6 Network Cable

As a CAT6 cable, the PFM920I-6U-C is designed for Ethernet networking applications and can be used for structured cabling installations involving compatible network equipment.

It is suitable for IP camera systems, NVR connections, network switches, computers, routers and other Ethernet-enabled devices. Proper termination with compatible RJ45 connectors and correct installation practices are important for achieving reliable network performance.

PoE Compatibility

The Dahua PFM920I-6U-C is designed to support Power over Ethernet applications. PoE allows compatible network equipment such as IP cameras to receive power and network connectivity through a single Ethernet cable.

This can simplify CCTV installations because installers may not need to run separate network and power cables to every compatible PoE device. PoE compatibility depends on the connected camera, switch, NVR and overall system configuration.

Four Twisted Pairs

The cable contains four twisted pairs with standard network conductor colors. The pairs are blue, white/blue, orange, white/orange, green, white/green, brown and white/brown.

The twisted-pair construction is designed for Ethernet networking applications and helps provide an organized cable structure for professional network installation.

HDPE Insulation

The conductors use HDPE insulation. Dahua specifies a minimum average insulation thickness of 0.21mm and an insulation diameter of approximately 1.0mm ± 0.1mm.

The insulation separates the individual conductors and forms an important part of the cable’s overall electrical and mechanical construction.

PVC Outer Sheath

The cable uses a PVC outer sheath with a specified minimum average thickness of 0.5mm. The outer sheath provides protection for the internal cable components and helps make the cable suitable for standard indoor structured cabling applications.

The cable is listed in white, making it easy to identify during network installation and cable management.

Suitable for CCTV Installations

The Dahua PFM920I-6U-C is particularly useful for IP CCTV installations. It can be used to connect compatible IP cameras to PoE switches, NVRs or network infrastructure.

For surveillance systems, selecting appropriate network cable is important because reliable network connectivity is required for video transmission between IP cameras, switches and recording equipment.

The cable can also be used for general Ethernet networking where CAT6 cabling is appropriate.

Suitable Applications

The Dahua PFM920I-6U-C can be used in homes, offices, shops, warehouses, commercial buildings, CCTV installations, network cabinets and structured Ethernet cabling projects. It is suitable for connecting IP cameras, NVRs, switches, routers, computers and other compatible network devices.

Technical Specifications

The Dahua PFM920I-6U-C is a 305m UTP CAT6 cable with a 99.97% oxygen-free copper conductor, approximately 0.57mm ± 0.01mm conductor diameter and 23AWG specification. It uses HDPE insulation, a PE separator and PVC outer sheath. Dahua lists the cable as PoE compatible and specifies a white cable color. The cable has a diameter of approximately 6.3mm ± 0.3mm and a maximum DC resistance of a single conductor of 7.5Ω/100m.

Conclusion

The Dahua PFM920I-6U-C 305m UTP CAT6 Network Cable is a practical networking cable for IP surveillance, Ethernet infrastructure and PoE installations. Its high-purity oxygen-free copper conductor, 23AWG construction, CAT6 design, 305-meter cable length and PoE compatibility make it suitable for professional CCTV and networking projects.

For IP camera installations, the cable can provide the network connection required between cameras, PoE switches and NVR systems when installed and terminated correctly. It is also suitable for general Ethernet networking applications where CAT6 UTP cabling is required.

Buy the Dahua PFM920I-6U-C UTP CAT6 Network Cable from Asbaab.pk for CCTV networking and structured Ethernet cabling requirements.